How To Fix A Sliding Metal Closet Door Track

Wiggle the door until the pivot snaps into the hole.

How to fix a sliding metal closet door track.

Take one of the doors down by lifting it and angling the bottom toward you until the rollers clear the top track then pulling it toward you. Then retighten the screw close the doors and check the fit. Parts for these doors are readily available at home centers hardware stores or online. When there is a problem with the track of your sliding door you can simply fix it by following a number of simple instructions.

Direct the part of the door towards you and take out the door from the closet. The first thing to check is what type of rail system your sliding closet door uses in order for it to slide. Use an aerosol lubricant to lubricate all the door rollers. If grime remains try wiping it up with a mild cleaner and a cloth.

Because sliding doors don t fold out the way bifold doors do they allow access to only half the width of the opening at a time. To clean and lubricate the hardware of a sliding closet door use a stiff brush a toothbrush or a hand vacuum to clean dust from the tracks. Inspect the rollers and tighten them with a. Then hold the spring loaded top pivot down while you swing the top of the door toward the frame and under the door track.

Then wipe it with a damp rag. See if the screws holding the guides down need tightening to be more secure. Lift your sliding closet door upwards into the top track. Loosen the set screw on the top bracket and slide the bracket slightly along the track to adjust the space between the top of the doors.

If a roller is stuck unscrew and remove it. Sliding closet doors operate on rollers that are positioned in tracks at the top jamb and floor allowing the doors to bypass each other in the tracks. Hold down the spring loaded guide on the opposite side of the other door panel and swing the door until the guide is under the track. Once the door is approximately under the hole in the track release the pivot.

To fix this issue first try vacuuming up debris and grime from the track with a crevice attachment. If your doors hang from a top rail and do not have a track on the floor then you need to either replace or tighten down the floor guides. If you have a sliding closet door that glides on a bottom track clean the track with a damp cloth to ensure smooth gliding. Step 1 remove sliding door.

Once secure release the door. Lubricate the rollers but not the track because lubricant will act as a magnet for dust. A closet door track that s bent inward prevents the door from sliding beyond the bend.